Caliber Rdab IO Manuel d'instructions télécharger pdf (Page 14)

 14 

TO DISASSEMBLE

Be sure pistol is unloaded!

1. Keep pistol pointed in a safe direction. Press the magazine latch forward and

withdraw the magazine from the receiver of the pistol and let the bolt go

forward (see Figure 4).

Fig. 4

2. Lay the pistol flat on its left side on the bench. Locate the locking catch on the

back of the receiver (see Figure 5)

3. Press the locking catch and lift the upper receiver up. It is important to perform this

operation while the pistol is laying flat on bench. Upper receiver is connected to the

receiver with the hinge pin and does not have any locking device preventing it from

slamming back to its rest position after locking catch is open (Figure 5)

Fig. 5

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Caliber Rdab IO Manuel d'instructions Page 14